The Eagle Talon 5000 automatic hot air welder is designed to weld all types of thermoplastic membranes (TPO, PVC, CSPE). This machine is extremely “user friendly” easy to use tool. It features accurate digital temperature control by using a thermocouple connected to a robust microprocessor giving one a closed loop system. It also features independent variable temperature and speed controls. The angled display makes reading in sunlight easier. There is also a LED work light in the welding nozzle area to facilitate directional control under conditions of dark or cloudy days.
Automatic Hot Air Welder For Thermoplastic Membranes
Performance Specifications
Model: Talon 5000
Voltage: 220/230V
Wattage: 4600 Watts
Air Flow: 16-21 CFM (450-600 L/min)
Temp: Ambient – 1200F (650 C)
Weight: 0-25 ft/min (7.6 meters/min)
Options & Accessories: 77 lbs (35kg)
Performance Specifications
Model: Talon 5000
Voltage: 220/230V
Wattage: 4600 Watts
Air Flow: 16-21 CFM (450-600 L/min)
Temp: Ambient – 1200F (650 C)
Weight: 0-25 ft/min (7.6 meters/min)
Options & Accessories: 77 lbs (35kg)
“We have use the Eagle Talon 5000 machine for the past several months. This machine is extremely easy to use and understand. The set up for speed and temperature is similar to setting your alarm clock. Just as an experiment, we lay down a 100 foot layer of membrane and welded the entire sheet. We tore the sheet apart and were amazed that we achieved 100% delamination along the entire length of the sheet. In my 26 years of roofing, I have never seen such a f******ing good weld. We love the machine.”
Scott Tappan | Commercial Assistant Manager
Collis Roofing, Orlando, FL
Talon 5000 Features
- Digital temperature control. Easy to set temperature
- Maintains temperature within 2 degrees F of set temperature
- Automatic cool down feature when finished welding Indicator light will glow constant red until set temperature is approached
- The red light blinks until set a temperature is achieved.
- Digital read out for accurate speed control Closed loop system for all electronics.
- Automatic start/stop feature when welding nozzle is engaged
- Ability to alter air flow from 100% down to 70%
- Ability to monitor: Elapsed time unit used, feet traveled per day, feet traveled lifetime
- Robust circuitry to withstand voltage spikes
- Predetermined error messages: message are in words, not error codes i.e Bad heat element
- Voltage meter installed
- Top mounted controls for easy access
- Machine will cut off if voltage is too low
- Guide handle can be easily adjusted for height Built in alignment adjustment
- Plug in heat element for easy replacement
- Integrated weights
- LED Work light
Readily Available Parts and Service
At The Winston Group, we pride ourselves on readily available parts and service for our hot-air welding tools. Replacement heating elements and other necessary parts are only a phone call away, and every part is stocked and available for immediate shipment from our manufacturing plants right here in the United States. If your welders needs servicing, you can rest assured that necessary repairs will be performed quickly and in full accordance with factory performance specifications.